Gator XP Oil And Grease Remover
1-800-416-9792
(No reviews yet)
Write a Review
Gator XP Oil And Grease Remover
DESCRIPTION
Gator Clean XP Oil and Grease Remover easily removes tough stains such as motor oil, cooking oil & grease. Just shake the bottle, spread it on the stain, let it dry, and sweep it up. Use it on concrete, pavers and stones. Not recommended for synthetic oil stains. Gator Clean XP Oil and Grease Remover is biodegradable and phosphate-free. Shake it, Spread it (let it dry), Sweep it!
FEATURES
- Concrete pavers, wet cast & natural stones
- Easily lifts & absorbs embedded oil stains as it dries from liquid to powder
- No scrubbing
- No rinsing
- No mess
APPLICATION & INSTALLATION
- Always test a small area before use. Do not use on wet surfaces. Use above 40°F (4°C) and provide maximum ventilation.
- 1) Shake bottle before applying to stain, extending 1″ (25 mm) beyond perimeter of the stain. Coating thickness should be 1/8″ (3 mm).
- 2) Allow to dry completely to powder. Wait 12 to 24 hours, depending on temperature, humidity and ventilation.
- 3) Sweep it up. If area still appears dark, provide adequate ventilation and allow moisture to evaporate.
- 4) If stain remains, re-apply, scrub with hard bristled brush, and repeat steps 2 & 3.
- 5) Rinse off any remaining residue with water.
PLEASE NOTE
Before using on sealed, colored, or painted surfaces, ALWAYS TEST the product on a small hidden area of approximately 4 square inches (26 sq. cm.) to ensure the results will meet your expectations. Prior use of other cleaners may inhibit performance. If applied on sealed pavers it may damage the seal.
*Please store container at above 32°F / 0°C.
