H100 Consolidation Treatment
1-800-416-9792
(No reviews yet)
Write a Review
H100 Consolidation Treatment
Stone and masonry strengthener & water repellent
PROSOCO Conservare® H100 treats badly deteriorated sandstone, limestone, cast stone, stucco, brick and terra cotta that requires consolidation and protection from water. This ethyl silicate solution works by penetrating deeply into deteriorated masonry surfaces, collecting at contact points between individual stone particles and binding them together, while simultaneously protecting the treated surface from water-related deterioration.
FEATURES
- One component – easy to use.
- Low viscosity allows deep penetration. Will not form hardened surface crust.
- No synthetic polymers.
- Rapid tack-free drying – no dirt attraction.
- Vapor-permeable. Treated surfaces “breathe.”
TECHNICAL DATA
- SHELF LIFE1 year in tightly sealed, unopened container
- VOC CONTENT>400 g/L
- FORMClear, colorless to slight yellow liquid with alcohol odor
- PHNon-applicable
- COVERAGE RATESee Product Data Sheet for variations per substrate.
- FREEZE POINT<–22°F (<–30°C)
- FLASH POINT110°F (43°C) ASTM D 3278
- TOTAL SOLIDS47% ASTM D 5095
- WT/GAL7.79 lbs
- AVAILABLE SIZES1-qt, 5-gal, 55-gal
OVERVIEW
For badly deteriorated stone that requires consolidation and protection from water, Conservare H100 is a combination consolidation/water-repellent treatment. This ethyl silicate treatment, modified with a silane water repellent, replaces the natural binding materials while protecting the treated surface from water-related deterioration. H100 may be used on most types of sandstone, limestone, cast stone, stucco, brick and terra cotta. One component - easy-to-use. Low viscosity allows deep penetration. Will not form hardened surface crust. The new binder is mineral - similar to the original stone - no synthetic polymers. Forms no byproducts harmful to the masonry. Good vapor permeability - the treated surface breathes. New binder is acid-resistant - resists acid rain.
